Formulated to maintain the natural appearance of untreated wood, Ultra Raw Hard Wax Oil retains this lighter tone, counteracting the ‘wet look’ commonly associated with traditional oil, wax or resin based finishes.

Perfect for lighter coloured woods such as Pine, Oak and Maple

Weight 2.5 kg.

Preparation .

Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150 grade sanding paper or 150 grit sanding disk, removing all traces of dust.

Application .

Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Hard Wax Oil is formulated for application directly, and does not require thinning.

Coverage .

A single application will cover approximately 20-24 square meters per litre,depending on the density of the substrate.